Setting Up Your Tv; Starting Setup; Important; Changing The On-Screen Display Language - Toshiba 30HF66 Manual Del Propietário

Setting up your TV
After you have installed the batteries and programmed the remote
control, you need to set some preferences on the TV using the menu
system. You can access the menu system with the buttons on the
remote control.
• When you make a menu selection, your changes are immediate.
You do not have to press MENU or EXIT to save your changes.
• After 15 seconds, the menu screen will automatically close if you
do not make a selection. Your changes will still be saved.
• When you are finished programming the menus, press EXIT.
Starting setup
The STARTING SETUP feature appears the first time you turn on the
TV, and helps you select the menu language, specify the TV/CABLE
setting, and program channels automatically.
IMPORTANT: You must connect an antenna or cable TV system
first. See "Connecting your TV" on pages 7=14 for details.
1. Press POWER to turn on the TV.
The starting setup function begins
and the language setup menu ......................
appears on the screen. Press A or .... _,,,
ESPANOL
V to select your desired language, ,_ . ................
then press ENTER.
2. Press A or V to select "TV" or
"CABLE," then press ENTER.
3. Press A or V to select START, and then press ENTER, which
starts the AUTO SETUP.
Note:To cancel the setup and return to the regular TV screen,
press A or V to select CANCEL and press ENTER.
4. When the AUTO SETUP is complete, the regular TV screen
appears.
Note:
* AUTO SETUP of channels may take 15-30 minutes to complete,
depending on your regional cable service.
* To cancel the AUTO SETUP and return to the regular TV screen,
press EXIT.
Changing the on-screen display language
You can choose from three different languages (English, French, and
Spanish) for the on-screen display of adjustment menus and messages.
To select a language:
1. Press MENU, then press _ or _ until the SETUP menu appears.
LANGUAGE ENGLISH
CLOCK SET
TV'CABLE GABLE
CH PROGRAM
ADD'ERASE
T
c_] :s ELECT l_) :ADJUST
2. Press A or V to highlight LANGUAGE.
SJ_L_LP
TV / CABLE CABLE
CH PROGRAM
ADD / ERASE _-
v
(_,) :SELECT (_.) :ADJUST
3. Press 41or _, to highlight your desired language.
-- POWER
-- Exit
Note:
The position and size of the on-screen menus
may change for some program formats (such
as 1080i or 720p).
20
3W70721A En p15-22 20 20/3/06 9:33 AM