Selecting
the cinema
mode
When you view a DVD movie (3:2 pulldown processed) from a DVD
player connected to the ColorStream
(component video) inputs on the
TV, smoother and more natural motion can be obtained by setting the
CINEMA MODE to FILM.
To set the CINEMA MODE to FILM:
1. Press MENU, and then press _ or
until the SETUP menu appears.
2. Press A or V to highlight CINEMA
MODE.
3. Press _ or I_ to highlight FILM.
4. Press EXIT to return to normal
viewing.
CLOSED
CAPTION
OFF
CC
ADVANCED
PICTURE
SIZE
P
_TURE
SCROLL
_
:SELECT
{_1
:ADJUST
To set the CINEMA MODE to VIDEO (off):
Highlight VIDEO in step 3, above.
Selecting
the display
format
(for 480p signals
only)
This feature converts a 480p input signal to 540p or 1080i.
To select the display format:
1. Press MENU, and then press 4 orl_ until the PICTURE menu
appears.
2. Press A or V to highlight DISPLAY FORMAT.
3. Press 4 or _ to select 540p or 1080i.
PICTURE
A
CableClear
ON
COLOR
COOL
_ :SELECT
L_3 :ADJUST
Adjusting the picture
Selecting
the picture
mode
You can select four picture modes--Sports,
Standard, Movie, and
Memory--as
described in the following table:
Av4_
Menu
Exit
Note:
• The DISPLAY FORMAT feature is available
only for 480p input. 1080i is always output
when a signal other than 480p is input.
• Ifyou notice flickering in a 480p image, try
setting the DISPLAY FORMAT to 540p.
SPORTS
STANDARD
MOVIE
MEMORY
Bright and dynamic picture (factory-set)
Standard
picture quality (factory-set)
Movie-like
picture setting
(factory-set)
Your personal
preferences
(set by you;
see "Adjusting
the picture quality" on page 34 )
To select the picture mode:
1. Press MENU, then press 41or _ to display the PICTURE menu.
2. Press A or _' to highlight MODE.
PJ_=3JZB_.
CONTRAST
SO
COLOR
2_
TINT
0
_HARPNESS
2N
i_ :S_LECT
_g_ :ADJUST
3. Press _ or _ to highlight the mode you prefer.
4. Press EXIT to return to normal viewing.
33
3W70721A
En p30-37
33
\_F//__
20/3/06, 3:59 PM