Product Description And Connections - Fuba ODE8510 T2 STEALTH Manual Del Usuario

Fuba

1.2 Product description and connections

1. DC 5V Input power supply 5V
50Hz power socket. Power on/off button in standby.
2. HDMI Audio-video output HDMI 1.4a for high definition, dedicated to connecting a display with HDMI interface.
NOTE

The video resolution is set by the factory to 1080i 50Hz.

Ensure that the display connected TV supports the video resolution setting on the receiver.
3. RF OUT Antenna loop output for connecting another device with a digital TV tuner (optional).
WARNING
The antenna loop is always enabled when the receive is in opertate mode. Instead, when the receiver is in standby
mode to save energy (paragraph 3.4.9.3), the RF pass-through output is not active.
4. ANT IN Antenna signal input.
5. IR External sensor/receiver (supplied) infrared (IR) for the remote control with LED display operating status
(GREEN) and standby (RED).
NOTE

Insert the plug of the IR sensor in the receiver by pressing it gently as far as it will go.

Position the IR sensor in front of the TV screen and take care not to place obstacles between the IR receiver and
the remote control so that they can communicate correctly.
6. USB A/USB B USB connectors, housings A e B to read personal media (video, pictures, music) and videotaping by
integrated digital terrestrial tuner where permitted by the transmission. The memories will be identified with the
following names:

Disc A: disc connected to the lower USB port (housing 6A)

Disc B
: disc connected to the upper USB port (housing 6B)
WARNINGS

Compatible with USB storage devices formatted with the file system FAT32.

We cannot guarantee compatibility with all USB memory devices on the market.

We recommend using USB HDD with external power supply, since the receiver cannot ensure proper power
supply via the USB port. This will avoid possible damage to the storage device.
2
1.5A, to connect the included power supply which in turn is connected to a 230V~