Audio And Subtitle Options; Usb Functions; Use And Warnings; Connection - Fuba ODE8510 T2 STEALTH Manual Del Usuario

2.5 Audio and subtitle options

If the current channel is broadcasted in more than one language and/or contains subtitles, the user can select the audio
track and/or the subtitles. Perform the following steps:

Press the AUDIO button or SUB on the remote control.

Select the audio track or the destre subtitles using the arrow keys ▲/▼.

Press the OK button to confirm.
In addition, near an audio track, the arrows ◄/► help you manage the distribution of audio channels
( Stereo / Mono / Left / Right ), an operation recommended only for advanced users.

2.6 USB Functions

The device's USB ports are dedicated mainly to connecting external storage devices with USB 2.0 interface in order to
record digital terrestrial channels from the built in tuner or to stream personal media.

2.6.1 Use and warnings

Before using a USB mass storage device, like a hard-drive (Hard Disc drive-HDD) or a flash memory/Flash drive, follow
the important rules and warnings below.

2.6.1.1 Connection

The USB device must be formatted in FAT32 and, to take advantage of the video recording function (see section 2.6.2), it
must have a capacity of free memory suited to the required needs.
At the first connection of a USB memory device or after any formatting of the same, the receiver will create a folder
named ALIDVRS2 that will be used as an archive of recordings.
Since the receiver has two USB ports, the memories will be identified with the following names:

Disc A:
disc connected to the lower USB (housing 6A, see paragraph 1.2).

Disc B : disc connected to the upper USB port (housing 6B, see paragraph 1.2).
WARNINGS

It is recommended to use hard drives with external power supply, as the only USB port of the receiver cannot
guarantee a proper power supply: risk of disc corruption and/or receiver!

The receiver is only compatible with USB storage devices formatted with FAT32 File System.

We do not guarantee compatibility with all USB memory devices on the market.

2.6.1.2 Disc removal

To safely remove the memory in order to avoid damaging files or the devices involved, we recommend disconnecting
USB memory only through the dedicated section of the menu Tools > Remove USB device safely.
WARNING
Never disconnect the USB device during media playback, recording, formatting or when there is a timed event recording:
risk of irreversible damage to the devices involved!

2.6.2 Personal Video recording (PVR)

Before proceeding with the use of a USB mass storage device, like a hard-drive (Hard Disc drive -HDD) or a flash
memory/Flash drive, follow the important rules and warnings in paragraph. 2.6.1.

2.6.2.1 Selecting a disc for recording

If you are using both USB ports, the receiver will enable the PVR function only on one of the connected memories,
namely the first memory detected by the receiver. In the event of removal/replacement/new connection of one or both
the USBs and, in any case, after every restart of the receiver, you should ensure that the enabling of the desired PVR
memory has been made. In any case, you can change the configuration by using the "Configure PVR" (see section
2.6.2.2).
NOTE

The speed with which the connected memory devices are detected depends on the tecnica characteristics of the
each memory device.

You cannot enable the PVR function on both the USB flash drives.

2.6.2.2 Configuring the recorder

Once connected and the USB memory has been recognized, enter the menu System Setup > PVR Storage Information
DVR Set
and press BLUE ( ) to configure the recorder
1. Timeshift : only Timeshift (paragraph 2.6.2.3).
Record
2. : only recording (paragraph 2.6.2.4).
DVR Type
parameter:
ODE8510 T2 STEALTH
7