Pvr Memory Information; Other; Channel Play Type; Auto Standby - Fuba ODE8510 T2 STEALTH Manual Del Usuario

Fuba

3.4.8 PVR Memory information

Technical consultation and configuration menu of the USB storage device when connected to the receiver. Provides
information about space available, as well as:
1. YELLOW button ( Format
WARNING
Formatting the memory will lose all data/files contained in it.
DVR Set
2. BLU button (

3.4.9 Other

3.4.9.1 Channel Play Type

Channel change mode using the CH+/CH- buttons between: all channels (
Encrypted
encrypted channels (

3.4.9.2 Auto Standby

The receiver is equipped with automatic shut-off function for energy saving. After three hours in operating mode without
any action by the user, the receiver will automatically go into standby mode. This function is factory preset and can be
deactivated through the menu item

3.4.9.3 Power Saving in Standby

The receiver is equipped even with a system to save energy during Standby mode. This function is factory preset. Also, it
can be disabled through the menu parameter
OUT (the antenna loop).

3.5 Tools menu

3.5.1 Information

Lists system information of the receiver, in particular the software version in use.

3.5.2 Factory Setting (reset)

The original factory restore function of the receiver is commonly called Reset. To reset, go to
then confirm by pressing the OK button on the screen
WARNING
When you do this, you will lose all user customizations and all channels loaded. The latest software version installed will
be preserved.

3.5.3 Upgrade by USB

The receiver software is upgradeable via USB port from this menu, after inserting a USB stick containing the image
appropriate software that the manufacturer will, at its discretion, provide when necessary.
WARNING
During a software update, do not interact with the receiver and never turn off the mains: there is a risk of permanent
damage to the receiver!

3.5.4 Remove USB device safely

Utilities for the safe removal of a USB storage device connected to the receiver. Refer to paragraph 2.6.1.2.
12
): Utility to format the USB memory to FAT32 format.
): USB memory configuration for recording and/or Timeshift. Refer to paragraph 2.6.2.1.
).
Auto Standby
(
Power Saving in Stanby
On Off
/ ).
On
(
Yes .
All
), only free channels (
Off
/ ) in order to keep always active the RF
Factory Setting
Clear
) or only the
menu,