Section For Advanced Use; Media Player Menu; Change Channel Menu; Tv/Radio Channel List - Fuba ODE8510 T2 STEALTH Manual Del Usuario

Duration
6. : Timer duration.
Save data entered/changed by pressing the OK button on the screen
timer).

3 Section for advanced use

WARNINGS
Changing some parameters of the menu may impair the correct functioning of the receiver itself. Therefore, carefully
read through this section of the manual before proceeding with any adjustments.
To avoid tampering, some functions are protected by a security code directly defined by the user during first installation
(see paragraph 1.4).
During normal TV program vision, by pressing MENU on the remote control, the main Menu will appear on the screen,
where the following submenus can be found:
1. Media Player
2. Edit Channel
3. Installation
4. System Setup
5. Tools
GENERAL RULES FOR NAVIGATION
To navigate through the various menu use:

The arrow keys ▲,▼,◄, ► to select menus, menu items, and options.

The OK button to open a selection/a submenu or confirm a choice.

The keys 0÷9 to insert an alphanumeric value.

The EXIT button, in general, allows you to leave a menu or return to the preceding the current window.
Also refer to any indications given in the various menus, specifying how to implement a function via a button on the
remote control.

3.1 Media Player menu

This menu is dedicated to personal media playback via USB. Refer to the section in this manual concerning USB
functions (section 2.6).

3.2 Change Channel menu

3.2.1 TV/Radio channel list

Menu for editing the channel list.
Favorite Channels List
To create a favorite channels list, press the FAV button, select the desired channel in the list, press OK and select
favorite list to which you want to add the channel, then press OK to confirm and EXIT. Repeat for the other channels to
add to the Favorites list, and then press EXIT to exit and save the changes.
While in viewing mode, to call up one of the created favorite lists, use the FAV key. Alternatively, while in the channel list,
use the arrow keys ◄/► on the remote control to change channel group.
Channel Lock
To protect a channel manually, resulting in a viewing access via entry of a user-defined system PIN entry before
installation (section 1.4), press the RED (
EXIT to exit and save the changes.
Skipping Channels
You can mark one or more channels to be skipped during channel changing with the buttons CH +/CH- on the remote
control. Press the GREEN button (
changes.
Moving Channels
To move a channel, press the YELLOW button (
this point, the channel move function behavior changes depending on if the LCN mode (section 1.4) is active or not. In
particular, if LCN is active will prompt the user to enter the position number, and, if taken, the positions of the two
channels in question will be exchanged. Instead, if the LCN is off, you must move the selected channel with the arrow
keys ▲/▼ and press OK to release it and place it in the chosen location. Press EXIT to exit and save the changes.
Lock
), highlight the channel from the list, press OK and enter your PIN. Press
Skip
), highlight the channel from the list and press OK. Press EXIT to exit and save the
Move ), select the channel you want to move from the list and press OK. At
Save Cancel
(or click to stop inserting/changing the
ODE8510 T2 STEALTH
9