Equipment Symbols; Packaging Symbols; Safety; Safety Information - Riester RVS-100 Manual Del Usuario

1.5 Equipment Symbols

41

1.6 Packaging symbols

Symbol Symbol Note
Fragile. Handle with care.
This Side Up.
Keep dry.
Stacking layer limit, where 'n'
represents the maximum permissible
number of layers. (N = 6).

2. Safety

2.1 Safety Information

Warning:
• Before putting the system into operation, verify that the
RVS-100 and RVS-200 and accessories are in correct wor-
king order and operating condition.
• Do not use device if any electrical connections become da-
maged, bent, or misaligned.
• To avoid explosion hazard, do not use the monitor in the
presence of flammable anesthetics or other flammable
substance in combination with air, oxygen-enriched envi-
ronments, or nitrous oxide.
• Do not open the monitor housings; electric shock hazard
may exist. All servicing must be performed by personnel
authorized by the manufacturer only.
• When using the monitor with electrosurgical units (ESU),
make sure the patient is safe. And the ESU must not
contact with patient cable.
• Do not come into contact with the patient during defibrilla-
tion. Otherwise serious injury or death could result.
• Do not rely exclusively on the audible alarm system for
patient monitoring. Adjustment of alarm volume to a low
level or off may result in a hazard to the patient. Remem-
ber that alarm settings should be customized according to
different patient situations and always keeping the patient
under close surveillance is the most reliable way for safe
patient monitoring.
• The physiological data and alarm messages displayed on
the monitor are for reference only and cannot be directly
used for diagnostic interpretation.
• To avoid inadvertent disconnection, route all cables in a
way to prevent a stumbling hazard. Wrap and secure ex-
cess cabling to avoid risk of entanglement or strangulation
by patient or personnel.
• To avoid risk of electric shock, this equipment must only
be connected to a grounded power supply.
• No modification of this equipment is allowed. Do not mo-
dify this equipment without authorization of the manufac-
turer. If this equipment is modified, appropriate inspection
and testing must be conducted to ensure continued safe
use of equipment.
• There will be significant risks of reciprocal interference
when the device is used in specific investigations or treat-
ments.
• The device's connector (including USB, network and so
on) can only be connected to the matched accessories and
network server. The misuse of them may cause damage
to the device.
• Operating high frequency electrosurgical equipment in the
vicinity of the monitor may produce interference and cause
incorrect measurements.
Caution:
• To ensure patient safety, use only parts and accessories
specified in this manual.
• At the end of its service life, the monitor, as well as its
accessories, must be disposed of in compliance with the
guidelines regulating the disposal of such products. If you
have any questions concerning disposal of the monitor,
please contact the manufacturer.
• Magnetic and electrical fields are capable of interfering
with the proper performance of the monitor. For this re-