Interfaces And Functions - SMA SUNNY BOY STORAGE Serie Instrucciones De Instalación

4 Product Overview
Symbol
WARNING
ELECTRIC SHOCK HAZARD
Do not remove cover. No user serviceable parts inside.
Refer servicing to qualified service personnel.
This is a transformerless device. The DC conductors of this photovoltaic system are
normally ungrounded but will become intermittently grounded without indication
when the inverter measures the PV array isolation.
When the photovoltaic array is exposed to light, it supplies a DC voltage to this
equipment. Disconnect AC and DC individually and wait 5 minutes before servicing.
Hazardous voltage remains for 5 minutes after disconnecting main power supply.
Do not touch terminals. All terminals may be energized in the open position.
Hot surfaces – To reduce the risk of burns, do not touch.
Contains FCC ID: SVF-KP20 Contains IC: 9440A-KP20
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CAN ICES-3 (B)/NMB-3(B)
UL 1741 SA
Grid support utility interactive inverter complying with a subset of the IEEE 1547-
2003 and IEEE 1547.1-2005 requirements.
Product specific evaluation criteria and ratings are included in the product
documentation.
110441-00.01
4.2

Interfaces and Functions

The inverter is equipped with the following interfaces and functions:
User interface for monitoring and configuration
The product is equipped as standard with an integrated webserver, which provides a user interface
for configuring and monitoring the product. The product user interface can be called up via the web
browser if there is an existing connection to an end device (e.g. computer, tablet PC or
smartphone).
SMA Speedwire
The product is equipped with SMA Speedwire as standard. SMA Speedwire is a type of
communication based on the Ethernet standard. SMA Speedwire is designed for a data transfer
rate of 100 Mbps and enables optimum communication between Speedwire devices within
systems.
Class 1 wiring methods are to be used for field wiring connection to the terminals of the
communication interface.
16 SBSxx-US-10-IA-xx-11
Explanation
Danger to life due to electric shock
The product operates at high voltages. Prior to performing any work on
the product, disconnect the product from voltage sources. All work on the
product must be carried out by qualified persons only.
Observe the documentation
Observe all documentation supplied with the product.
Warning label with compliance information
The product is has no galvanic isolation.
UL 1741 und CSA C22.2 No. 107.1 are the standards applied by Un-
derwriters Laboratories to the product to certify that it meets the require-
ments of the National Electrical Code
and IEEE 1547.
SMA Solar Technology America LLC
®
, the Canadian Electrical Code
Installation Manual
®