Mounting; Requirements For Mounting - SMA SUNNY BOY STORAGE Serie Instrucciones De Instalación

SMA Solar Technology America LLC
5

Mounting

5.1

Requirements for Mounting

Requirements for the Mounting Location:
Danger to life due to fire or explosion
Despite careful construction, electrical devices can cause fires.
• Do not mount the product in areas containing highly flammable materials or gases.
• Do not mount the product in potentially explosive atmospheres.
☐ The inverter must be mounted on a solid support surface (e.g. concrete, brickwork, suitable
constructions). When mounted on drywall or similar materials, the inverter emits audible
vibrations during operation which could be perceived as annoying.
☐ The inverter can be mounted in a position that is directly exposed to solar irradiation. Direct
solar irradiation can cause the inverter to overheat. As a result, the inverter reduces its power
output.
☐ The mounting location must be suitable for the weight and dimensions of the inverter (see
Section 10 "Technical Data", page 63).
☐ To ensure optimum operation, the ambient temperature should be between -25°C (-13°F) and
+45°C (113°F).
☐ Climatic conditions must be met (see Section 10 "Technical Data", page 63).
☐ The mounting location should be freely and safely accessible at all times without the need for
any auxiliary equipment (such as scaffolding or lifting platforms). Non-fulfillment of these
criteria may restrict servicing.
Installation Manual
WARNING
SBSxx-US-10-IA-xx-11
5 Mounting
23