Mounting The Inverter - SMA SUNNY BOY STORAGE Serie Instrucciones De Instalación

5 Mounting
15°
Figure 5 : Permitted and prohibited mounting positions
☐ Do not mount multiple inverters directly above one another.
Figure 6 : Permissible and impermissible mounting positions of multiple inverters
5.2

Mounting the Inverter

Additionally required mounting material (not included in the scope of delivery):
☐ Three screws suitable for the support surface (diameter: 8 mm (5/16 in))
☐ Three washers suitable for the screws
☐ Where necessary, 3 screw anchors suitable for the support surface and the screws
☐ To secure the inverter against theft: one padlock suitable for outdoor use
Padlock dimensions:
• Diameter of the shackle: 8 mm to 10 mm (0.31 in to 0.39 in)
• Width of the shackle (inner dimension): 30 mm to 40 mm (1.18 in to 1.57 in)
• Height of the shackle (inner dimension): 30 mm to 40 mm (1.18 in to 1.57 in)
Risk of injury when lifting the inverter, or if it is dropped
The inverter weighs 26 kg (57.32 lbs). There is risk of injury if the inverter is lifted incorrectly or
dropped while being transported or when attaching it to or removing it from the wall mounting
bracket.
• Transport and lift the inverter carefully.
26 SBSxx-US-10-IA-xx-11
SMA Solar Technology America LLC
CAUTION
Installation Manual