Tool Parts; Parts Of The Extension-Pole Connected Model; Specifications Of The Tool With Direct Handle - CAMPAGNOLA PUMA Manual De Uso Y Mantenimiento

ATTENTION!
• Any other use has to be considered improper and potentially dangerous for the operators‟ safety. This would make any
warranty claims void.
•
If it is not used for the purposes it was designed for, the tool may cause serious injuries to personnel and bystanders and
damages to equipment and things.

3.5 Tool parts

POS. DESCRIPTION
1 Handle
2 Front guard
3 Bar guard
4 ON/OFF switch
Operating lever
5
Safety device
6
7 Handle connector
Holding handle
8
Tap
9
10 Led light
Power supply cable
11
Inertial chain brake (only tool
12
model without extension pole)
Locking nut
13
Bar
14
Chain
15
Adjustment screw
16
Motor housing
17
Chain locking pin
18
19 Identification sticker
20 Lubrication pump flexible
circuit board
21 Lubrication pump
22 Lubricating oil reservoir
23 Flexible circuit board
24 Brushless motor

3.5.1 Parts of the extension-pole connected model

25 Fixed extension pole
26 Telescopic extension pole
27 Branch-pulling hook
28 Cable protection

3.6 Specifications of the tool with direct handle

• Chain pruner weight with 8‟‟ bar:
•
Cutting bar (14) length:
• 8" bar (14) max. cut :
•
Inertial chain brake (12):
•
Active safety device (6):
•
Automatic chain (14) lubrication:
•
Min. and max. tension limit of the lead battery:
•
Min. and max. tension limit of the lithium battery:
Permits to hold the tool
Protects the pinion and the bar chain
Protects the chain when the tool is not being used
Switches the tool on and off
Operates the tool when it is being pressed
Controls the operating lever
Connects the tool to the power supply cable
Allows the operator to work holding the tool
Allows to add oil to the reservoir
Shows whether the tool is on or off
Connects the tool to the battery
Protects the hand and operates the emergency brake
Locks the bar
Drives the cutting chain
Cuts branches, trunks, etc.
Adjusts the chain tension
Contains the motor and the flexible circuit boards
Stops the chain in case of breakage
Shows the product identification details
Operates the lubrication pump
Lubricates the bar and the chain
Contains the oil for the bar and chain lubrication
Drives the tool
Gives motion to the chain
Holds the tool and makes working from the ground easier
Holds the tool and makes working from the ground easier
Helps the operator to clean the cutting area
Protects the cable from twisting and tugs
1.800 kg
8"
Ø 150 mm
Yes
Yes
Yes
9V – 14V
11.5V – 18.5V
FUNCTION
PICTURE
REFERENCE
A
A
A
B
B
B
B
C
C
C
D
E
E
F
F
F
F
F
N
O
O
O
O
O
V
Z
X
W