Description Of The Connection Boxes; Footswitch - ACTEON SOPRO 717 First Manual De Usuario

E N G L I S H
8

DESCRIPTION OF THE CONNECTION BOXES

8.1. DOCK M_USB2 POWER SUPPLY
The dental camera power supply is connected to the power outlet. The other end of the cord is connected to the
dock where the symbol 6 V is located (PHIHONG, PSA 10R-060 Model or FRIWO, MPP15 FW 7555M/06 model).
The power supply automatically adapts to the electric networks 115 V~ - 230 V~; 60 Hz - 50 Hz; 0.5 A. The camera
voltage is powered by 6V of a continuous low voltage type.
8.2. DOCK MU_USB2 POWER SUPPLY
The electrical connection of this connection box should be performed by the installer. The dental camera power
supply is performed through the connection box that should be connected 24 V~; 50 Hz - 60 Hz; 10 VA.
8.3. DOCK USB2 POWER SUPPLY
The dental camera electrical supply is directly performed through the computer USB port. The voltage powering
the camera is of continuous 5 V low voltage type (0.5 A).
8.4. VIDEO AND USB OUTPUTS
This camera has two independent video outputs* - a composite one and a Y/C "S-Video" one.
One of these two outputs should be connected to the monitor video input (preferably Y/C "S-Video"). According to
the connection box used, this camera has a digital USB 2.0 output that can be connected to a computer USB2 port.
(* Except for the DOCK USB2)

8.5. FOOTSWITCH

The footswitch should be connected here * , if you have selected it to freeze the image.
(* Except for the DOCK USB2)
15
2 0 1 0 - 0 3 - 2 6 • U s e r ' s m a n u a l • S o p r o 7 1 7 F i r s t