Cleaning And Storage; Troubleshooting - Beem BH9090 Manual Del Usuario

21
Correct storage and "degassing" is crucial to allow you to enjoy your freshly roasted coffee for as long
as possible. Our BEEM COFFEE CANISTER storage jar with measuring spoon – 1.9 l (07702)
with an integrated CO
the coffee beans from oxygen, is ideal for this purpose. It also prevents your coffee from losing its
aroma and, thanks to the adjustable date display, you can always see when you added your coffee.
The coffee canister can be obtained from selected specialist stockists, via our website www.beem.de
or from our customer service department on request.

Cleaning and Storage

PLEASE NOTE!
• The device and the accessories are not dishwasher-safe.
• Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to clean
the device. These may damage the surface.
•
Empty the collecting container (C) and use a soft brush to remove any residues of the coffee
bean skin from it and the lid (B). Clean it with warm water and a little detergent once a
month if necessary.
•
Wipe down the motor unit (A) with a damp cloth.
•
All parts must be completely dry before they are reinserted and used or stored away.
• Store the device and all accessories in a dry, clean, frost-free place that is protected from direct
sunlight and cannot be accessed by children or animals.

Troubleshooting

If the device does not work properly, check whether you are able to rectify the problem your-
self. If the problem cannot be solved with the steps that are listed, contact our customer service
department.
Do not attempt to repair an electrical device yourself!
Problem
The device cannot be
switched on. /
The roasting process
does not start.
The fuse in the fuse box
is triggered.
04202_Inlay_DE-EN-FR-ES-IT_A5.indb 21 04202_Inlay_DE-EN-FR-ES-IT_A5.indb 21
stay-fresh valve, which allows CO
2
Possible cause
The mains plug is not inserted
correctly in the plug socket.
The plug socket is defective.
There is no mains voltage.
Too many devices connected to
the same circuit.
to escape and at the same time protects
2
Fix
Correct the fi t of the mains plug.
Try another plug socket.
Check the fuse of the mains
connection.
Reduce the number of devices in
the circuit.
EN
16.04.2021 11:48:27 16.04.2021 11:48:27