Parameter Choice; Torque; Unit - Desoutter EAP1.5-15 Serie Manual Del Operador

Part no 6159936431
Issue no 06
Language English
Date 09/2009
24
Page 10 /

1.2.2 - Parameter choice

From the programming mode, press
When you press they are displayed in the following order:

1 torque

Current value
4 speed
Current level
To modifiy the parameter, press
The flashing display shows that the value can be modified.
1.2.3 - Torque
By default the torque unit is the Nm. If the unit is
different, it is recommended to modify it before
programming the torque.
1 From the torque mode, press
gramme the value (between 0 and the maximum
torque of the tool).
2 Press to validate.

1.2.4 - Unit

1 From the unit mode, press
the unit (Nm; Ftlb; Inlb).
2 Press to validate.
or to scroll the parameters.
2 unit
5 to quit without saving parameters.
.
or to pro-
or to programme
EAP/EDP
3 learning
Current unit