Chapter 2 - Description And Operation; General; Mains Supply - Desoutter EAP1.5-15 Serie Manual Del Operador

Part no 6159936431
Issue no 06
Language English
Date 09/2009
24
Page 4 /

CHAPTER 2 - DESCRIPTION AND OPERATION

1 - GENERAL

EAP/EDP tools are electric fastening tools directly supplied by mains. They are fitted with a torque transducer for high-precision
torque control. Main parameters (torque; speed) can be adjusted directly on the tool using a display and 3 programming keys. It
is also possible, whatever the option, to completely programme the tool and to save the parameters using a PDA (Personal Digital
Assistant) via a wireless connection between the tool and the PDA.
Tool type
A=angle-head
D=straight
Motor type
Maximum torque in Nm
There are several options:
"Standard" (T)
"Advance" (TA)

1.1 - Mains supply

There are 2 types of tools:
• one tool which works with 230 VAC mains voltage, ± 8%, 50/60Hz
• one tool which works with 115 VAC mains voltage, ± 8%, 50/60Hz
Although the peak power can reach 2 kW during the final speed phase, it is recommended to adjust the power circuits according
to the maximum average power.
The average power input depends on the tool type, the assembly type and the tightening rate. However, for heat dissipation rea-
sons, the maximum average power can not exceed 0.3 kW.
www.desouttertools.com
EAP 1.5 - 15 - T 2
screwing with a preset torque value,
informing the user that the assembly has been properly carried out.
ensuring that the assembly has been properly carried out through:
• torque control,
• checking rotation angle,
informing the user that the assembly has been properly carried out.
EAP/EDP
Tool option
T=Standard
TA=Advance
Voltage
1=115 VAC
2=230 VAC