English Instructions / Technical Information / Product Warranty - Nüby NTNV 67692 Manual De Instrucciones

Programmable Warmer & Steriliser
IMPORTANT SAFETY INFORMATION
When using this or any other electrical product, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS CAREFULLY BEFORE USING
• When in use, the warmer contains hot water.
• Always keep the warmer and its lead out of the reach of small children.
• Always use on a flat, heat-resistant surface.
• Before plugging in the warmer for the first time, ensure the voltage is compatible with
your electricity supply by checking the label on the base of the unit.
• Ensure water has been added before switching the unit on.
• Always unplug from the mains when not in use. Do not leave the cord within a child's
reach.
• Do not let the cord hang over edge of table or counter, or touch a hot surface.
• The appliance is for household use only. Do not use outdoors.
• Do not immerse in water. Clean with a damp cloth only.
• Pour out excess water and unplug appliance when not in use, or before cleaning or storing.
WARNING - Failure to follow these instructions may cause scalding or damage to product.
Information on the disposal for
Waste Electrical & Electronic Equipment (WEEE)
This symbol on the products and accompanying documents means that used electrical and electronic products should not be mixed with general household
waste. For proper disposal for treatment, recovery and recycling, please take these products to designated collection points where they will be accepted on
a free of charge basis. In some countries you may be able to return your products to your local retailer upon the purchase of a new product. Disposing of this product
correctly will help you save valuable resources and prevent any possible effects on human health and the environment, which could otherwise arise from inappropriate
waste handling. Please contact your local authority for further details of your nearest collection point for WEEE. Penalties may be applicable for the incorrect disposal of
this product in accordance with national legislation.
Do not immerse in water.
Warning! Children should be supervised to ensure that they do not play with the appliance
Keep this instruction sheet for future reference as it includes important information.
Ensure that the heating guidelines are followed to ensure that the food is not heated for too long.
For your child's safety – Always check food temperature before feeding by testing on a sensitive part of your skin.
BOTTLE WARMING instructions
1. When ready to begin, insert plug into wall outlet. You will hear a single beep.
2
2. ADD the amount of water 3. Place frozen*, refrigerated,
as advised by the chart (pg. or room temperature bottle in
59) for intended size of bottle. lift-out basket. Always use this
Then pour water directly into basket to prevent damage to
the warmer basin or into the bottles. Do not use unit lid.
measuring cup if you intend to
travel with the product.
5
40 - NTNV 67692
3
4
4. Press the POWER button ( )
once to turn your warmer ON.
All other icons will light up and
begin flashing green. .
5. Choose a button in the left quadrant
that matches the temperature of
your bottle. Frozen, refrigerated, or
room temperature. Icons in the other
quadrants will continue flashing until a
button is chosen for each one.
• Children should be supervised to ensure that they do not play with this appliance.
• If there is any visible damage to the unit or supply cord, do not dismantle, it must be
replaced by the manufacturer or similarly qualified persons in order to avoid a hazard.
• When the feed has reached the desired temperature, remove immediately. If left in the
warmer, the temperature of the feed will continue to increase.
• Do not touch the hot surfaces; use handle or button.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety
• Ensure the contents are at a safe temperature before feeding.
• Always use the lift out basket to prevent damage to bottles, food jars.
*Note: Do not place a frozen silicone bottle in warmer. Defrost in warm
water before warming. This is to ensure that the milk or formula in the
bottle is heated properly. Frozen breast milk should be defrosted in the
refrigerator, and can be stored there for 24 hours. Once it has defrosted,
it must not be refrozen. Do not be tempted to defrost or warm your
breast milk in the microwave. If you need the milk in a hurry, defrost it
under cool, then warm running water. Dry the outside of the container
before you open it.
6
6. In the bottom quadrant, there is a
bottle and a food icon. Press the button
once to choose the bottle icon.