Nüby NTNV 67692 Manual De Instrucciones página 41

7
9.Once heating is complete, all the selected icon lights will automatically turn off. The center dot will change from flashing to SOLID GREEN and the unit will beep for 5 seconds simultaneously.
After the beeps, the unit will automatically turn off.
10. Remove the bottle and shake well (about 10 seconds) to distribute heat evenly. If the bottle is not warm enough, add more water and reheat as necessary. Always test the temperature of
the liquid first, before feeding it to baby.
FOOD WARMING instructions :
1. When ready to begin, insert plug into wall outlet. You will hear a single beep.
2
2. ADD the amount of water as advised by
the chart (pg. 60) for intended size of the
food jar. Pour the water directly into the
warming basin or into the measuring cup
if you intend to travel with the product.
6
8
WARNING: Beware of hot steam from the warming basin; do not put your hands in or around the warming basin during or immediately after warming.
10. Once heating is complete, all the selected icon lights will automatically turn off. The center dot will change from flashing to SOLID GREEN and the unit will beep for 5 seconds repeatedly.
After the beeps, the unit will automatically turn off.
11. Remove the food jar or cup and stir* well to distribute heat evenly. If food is not warm enough, add more water and reheat as necessary. Always test the temperature of the food first,
before feeding it to baby.
*Note: Frozen food may require more stirring and reheating that refrigerated or room temperature food.
7. In the right quadrant, press the
button until proper warming size
is selected: 2-4 oz, 5-8 oz, or 9-12
oz bottle..
3
3. Remove lid from food jar. Place the
frozen, refrigerated, or room temperature
food jar into the lift-out basket. Always
use this basket to prevent damage to food
containers.
6. Choose a button in the left quadrant
that matches the temperature of the
baby food. Frozen, refrigerated, or
room temperature. Icons in the other
quadrants will continue flashing until a
button is chosen for each one.
8. In the right quadrant, press the
button until proper warming size
is selected: 2-4 oz or 5-8 oz. The
9-12 oz selection is not available for
warming food.
8
4
4. Place the adapter ring on top of the
warmer. Do not lose this ring as the food
will not warm properly without it. Do not
use unit lid.
7
9
8. Once all three selections have been
made, press the
Power /Start ( ) button again to begin
the heating process.
WARNING: Beware of hot steam from the
warming Basin; do not put your hands in
or around the warming Basin during or
immediately after warming.
5
5. Press the POWER button ( ) once, to
turn your warmer ON. All other icons will
light up and begin flashing green.
7. In the bottom quadrant, there is a bottle
and a food jar icon. Press the button twice
to choose the food jar icon ( ).
9. Once all three selections have been
made, press the Power/Start ( ) button
again to begin the heating process.
NTNV 67692 - 41