Description Of Materials; Descripción De Los Materiales - GREENoneTEC SolPal Compact M-G Instrucciones De Instalación Y Montaje

Description of materials

Descripción de los materiales
1
included
2
included
3
4
5
5
22
COMBINED NON-RETURN/SAFTEY VALVE
THIS VALVE IS A PRESSURE RELEASE MECHANISMS
USED IN PRESSURE SYSTEMS. IT HAS A NON-RETURN
VALVE INTEGRATED. THE USE OF THESE VALVES IS
STRICTLY REQUIRED DUE TO SAFETY REGULATIONS. THE
SAFETY VALVE OPENS AT A PRESSURE OF 87 PSI TO
REDUCE EXCESS PRESSURE.
SAFTEY VALVE
THIS VALVE IS A PRESSURE RELEASE MECHANISMS
USED IN PRESSURE SYSTEMS. THE USE OF THESE VAL-
VES IS STRICTLY REQUIRED DUE TO SAFETY REGULA-
TIONS. THE SAFETY VALVE OPENS AT A PRESSURE OF
43 PSI TO REDUCE EXCESS PRESSURE.
COLD WATER SUPPLY ISOLATION VALVE
THIS VALVE SHOULD STAY OPEN TO ALLOW WATER
FROM THE PUBLIC WATER SYSTEM TO FILL THE SYSTEM
WATER TANK. WHEN THIS VALVE IS CLOSED, THE
SYSTEM AND THE SUPPLEMENTAL WATER HEATER ARE
DISCONNECTED FROM THE PRESSURIZED MAINS OF THE
PUBLIC WATER SYSTEM.
HOT WATER SUPPLY ISOLATION VALVE
KEEP THIS VALVE OPEN TO ASSURE THAT HOT WATER
CAN DRAIN OR ESCAPE IN CASE OF OVERHEATING. THIS
VALVE TEMPORARILY BE CLOSED FOR MAINTENANCE
PURPOSES.
DRAIN VALVE
THIS BOILER DRAINS ARE NORMALLY CLOSED AND
CAPPED. USE THESE VALVES TO DRAIN THE SYSTEM.
ATTACH A GARDEN HOSE TO BOTH DRAIN VALVES. TER-
MINATE THE HOSES IN EITHER A SERVICE BASIN OR AN
APPROPRIATE SPOT OUTSIDE THE HOUSE. OPEN BOTH
BOILER DRAINS AT ONCE TO DRAIN THE UNIT.
WARNING: WATER MAY BE DISCHARGED AT VERY
HIGH TEMPARATURES. TO AVOID SCALDING, EXER-
CISE MAXIMUM CAUTION WHEN DRAINING THE
HOT WATER FROM THE SYSTEM. DO NOT POINT
HOSE AT PERSONS OR PETS. ALWAYS DISCHARGE
THE HOT WATER TO A SAFE PLACE.
DRAIN VALVE
THIS BOILER DRAINS ARE NORMALLY CLOSED AND
CAPPED. USE THESE VALVES TO DRAIN THE SYSTEM.
ATTACH A GARDEN HOSE TO BOTH DRAIN VALVES. TER-
MINATE THE HOSES IN EITHER A SERVICE BASIN OR AN
APPROPRIATE SPOT OUTSIDE THE HOUSE. OPEN BOTH
BOILER DRAINS AT ONCE TO DRAIN THE UNIT.
WARNING: WATER MAY BE DISCHARGED AT VERY
HIGH TEMPARATURES. TO AVOID SCALDING, EXER-
CISE MAXIMUM CAUTION WHEN DRAINING THE
HOT WATER FROM THE SYSTEM. DO NOT POINT
HOSE AT PERSONS OR PETS. ALWAYS DISCHARGE
THE HOT WATER TO A SAFE PLACE.
RECOMMENDED SAFETY VALVE WITH NON-RETURN FOR
WATER HEATER:
¾", OPENING AT 87 PSI PRESSURE UV-RESISTANT,
MATERIAL: HOT MOLDED BRASS CW617N, NICKEL PLATED
SURFACE MAX. WORKING TEMPERATURE: 250°F.
RECOMMENDED VENTILATION VALVE:
¾", OPENING AT 43 PSI PRESSURE, UV-RESISTANT,
MATERIAL: HOT MOLDED BRASS CW617N
MAX. WORKING TEMPERATURE: 250°F.
RECOMMENDED BALL VALVE:
¾" FULLY PORTED BRASS BALL VALVE FOR HEATING, PLUMBING,
AND INDUSTRIAL APPLICATIONS. MAX. SAFE OPERATING PRES-
SURE 600 PSI TEMPERATURE RANGE UP TO 250°F
RECOMMENDED BALL VALVE:
¾ FULLY PORTED BRASS BALL VALVE FOR HEATING, PLUMBING,
AND INDUSTRIAL APPLICATIONS. MAX. SAFE OPERATING
PRESSURE 600 PSI TEMPERATURE RANGE UP TO 250°F
RECOMMENDED DRAIN VALVE:
¾" UNIBODY BALL VALVE MAX. TEMPERATURE: 250°F
STANDARD PORT OPENING WITH HOSE UNION AND CAP
DELIVERED SEPARATELY.
RECOMMENDED DRAIN VALVE:
¾" UNIBODY BALL VALVE MAX. TEMPERATURE: 250°F
STANDARD PORT OPENING WITH HOSE UNION AND CAP
DELIVERED SEPARATELY.
EN
30-40° 0°