General Points; General Installation Instructions; System Alignment; Structural Engineering Aspects - GREENoneTEC SolPal Compact M-G Instrucciones De Instalación Y Montaje

30-40° 0°

Assembly instructions

Instrucciones de montaje

1. General Points

We are delighted that you have chosen our product. With this high-quality, high-performance product, you have made an excel-
lent selection. We wish you a trouble-free installation and successful operation. Please read this manual carefully before installa-
tion and commissioning, as it contains important information for proper installation and for safety.
Gravity principle
In a thermosiphon systems, the circulation between the storage tank and the collector takes place according to the principle of
will be used. For this, the collector (heat generator) must be arranged below the tank (heat consumption). The heat transfer
located above the collector. As soon as the lighter warm liquid rises, a gravity circulation takes place.
AFTER THE COMMISSIONING HAS BEEN SUCCESSFULLY COMPLETED, THE ASSEMBLY INSTRUCTIONS MUST BE HANDED OVER TO
THE END CUSTOMER. WE WOULD LIKE TO POINT OUT THAT PROPER FUNCTION CAN ONLY BE GUARANTEED IF:
1) YOU HAVE ANNUAL MAINTENANCE CARRIED OUT BY QUALIFIED EXPERTS
2) THE INSTRUCTIONS MENTIONED IN THIS MANUAL AND
3) THE STATED OPERATIONAL RECOMMENDATIONS ARE COMPLIED WITH.
1.1. Expert Persons (Installation, Commissioning and Maintenance)
Electricians) with current trade registrations. All the activities listed in these installation instructions must, without exception, be
carried out by these expert persons.
1.2. General Storage and Transport Instructions
The system components must not be stored outdoors without protection. In particular, the panel connections and venting open-
ings must be protected, so that water and contamination such as dust cannot enter them.
You must not lift the solar panel by its connections or screw threads. Do not jolt the panel or allow the system components to
be affected by mechanical factors. This is particularly important for the solar glass, the back of the panel, the pipe connections
and the storage tank sleeving. The manufacturer is not liable for structural damage or any other damage caused by improper
handling or incorrect installation.

1.3. General Installation Instructions

sionals only. The supplied materials must be used for installation. Prior to installing and operating the solar panel system, famil-
iarise yourself with the locally applicable standards and regulations.
2. Installation Guidelines

2.1. System Alignment

For the installation of the Thermosiphon System, you will need a suitable location without shadow (e.g. no trees, buildings)
throughout the year.
The optimum function of the Thermosiphon System will be obtained if the system is installed pointing South in the Northern
Hemisphere, as far as possible, and pointing North in the Southern Hemisphere, as far as possible.
The Thermosiphon System is suitable for a minimum inclination between 15 º and a maximum inclination of 40 º. Deviations
from the above panel inclinations are not permitted! The Thermosiphon System may only be exposed to direct sunlight if the
from direct sunlight.

2.2. Structural engineering aspects

of the roof or substructure must be checked for compliance with local and regional stipulations at the site prior to the installation of the
Thermosiphon system, if necessary by means of the commissioning of a structural engineer (see also the weight data). In particular, it is
tant in areas prone to heavy snow or high wind speeds. When doing this, you need also to investigate all the peculiarities of the erection
location (prevailing winds, venturi effects, eddies, etc.) that may lead to locally increased loading.
5
EN