Checklist For First Start-Up - GREENoneTEC SolPal Compact M-G Instrucciones De Instalación Y Montaje

Checking list para la puesta en marcha
serial number of the product:
serial number of the tank:
serial number of the collector:
date of installation:
customer:
place (country):
adress:
name of the installer company:
phone number of installer company:
1 Checking the positioning of the thermosiphon system
1.1 Is the thermosiphon system facing South for the North hemisphere and North for the South hemisphere?
1.2 Do you have checked that the thermosiphon system is not located in the shadow during the whole year?
1.3 Was the collector installed with an installation angle between 15° - 40°
1.4 Is the thermosiphon system installed at least 1m from the walls or the end of the roof?
2 Checking the thermosiphon system installation
2.1 Did you use the provided manual?
2.2 Maximum operation pressure is 58 psi bar?
2.3 If the pressure of the cold water in the main is more than 58 psi, do you have installed a pressure reducer?
2.4 Did you noticed the statics?
In order to avoid humidity problems or water ingress on the roff, the pipes which are enterning the roof
2.5 must be very well sealed. Local building engineer should provide you precise guidelines, depending in the
kind of roof construction. Do you accordingly sealded?
All connections pipes must be very well insulated to avoid freezing or destruction of them due to UV
2.6 radiation. Depending on the loacal weather conditions, it must be chosen the correct insulation material.
Do you accordingly insulated?
2.7
2.8 Are all the connections free of heavy loads?
2.9 Do you make sure that there is no leakage?
The system can produce hot water with temperature higher than 140°F.
2.10
Do you use a highly recommended mixture valve?
2.11 Do you use the original glycol for freezing protection?
2.12 Do you checked all the valves are working properly (visible damage)?
56
EN
30-40° 0°
yes no
yes no