Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Safety information
Advertencias de seguridad
USER MUST BE IN COMPLIANCE WITH ALL
APPLICABLE FEDERAL, STATE, AND MUNI-
CIPAL BUILDING AND FIRE SAFETY LAWS,
CODES, AND REGULATIONS.
CHECK THE UNIT AND THE ACCESSORIES
FOR ANY VISIBLE DEFECTS, CRACKS, OR
OTHER DAMAGES AFTER UNPACKING AND
BEFORE FIRST USE. IF YOU SEE ANY DAMA-
GE, DO NOT USE THE PRODUCT. CONTACT
CUSTOMER SERVICE FOR HELP. CAREFULLY
READ INSTALLATION INSTRUCTIONS BEFO-
RE YOU INSTALL THE PRODUCT.
ONLY OPERATE THE PRODUCT AFTER PRO-
PER AND COMPLETE INSTALLATION AND
ASSEMBLY.
CAUTION! THE SOLPAL SYSTEM AND ITS
PIPES AND ACCESSORIES CAN REACH TEM-
PERATURES OF UP TO 212 DEGREES FAH-
RENHEIT. DO NOT TOUCH ANY PARTS OF
THE SOLPAL SYSTEM, ITS PIPES OR ITS AC-
CESSORIES DURING OPERATION OR WHEN
THE SOLPAL IS EXPOSED TO SUNLIGHT.
ASSURE THAT MINORS UNDER THE AGE OF
18, OR PERSONS WITH REDUCED PHYSI-
CAL, SENSORY OR MENTAL ABILITIES DO
NOT HAVE ACCESS TO THE SOLPAL SYSTEM.
ASSURE THAT THE SOLPAL IS NOT IN DI-
RECT CONTACT WITH ANY ITEMS SUCH AS
LEAVES, TWIGS, FLAMMABLE MATERIALS,
CABLES, OR OTHER MATERIALS. KEEP A
SAFETY CLEARANCE OF AT LEAST 5 FEET
FROM AIR CONDITIONING SYSTEMS, HEA-
TERS, SATELLITE DISHES ORANY OTHER
ELECTRONIC DEVICES.
Regulation-compliant, non-personal fall protec-
tion or safety netting or other catch equipment,
in accordance with Roof Covering and Roof
Sealing Work and Scaffolding Work with Safety
Net, must be installed before starting work. See
the Construction Worker Protection Ordinance,
German Federal Law Gazette [BGBL] 340/1994
must be observed.
ASSURE COMPLIANCE WITH ALL APPLI-
CABLE FEDERAL, STATE, AND MUNICIPAL
SAFETY LAWS, CODES AND REGULATIONS
PERTRAINING TO ROOFING SAFETY.
Only use safety harness equipment (harnesses or
belts, ropes and straps, fall arresters, rope shor-
teners) that has been approved by authorised
testing authorities.
Do not use damaged ladders e.g. splintered
stringers and rungs on wooden ladders, bent or
kinked metal ladders. Do not patch up splintered
or broken stringers, steps and rungs of wooden
ladders.
Make sure that lean-to ladders are propped
securely. Secure lean-to ladders against slipping,
falling over and sinking into the ground e.g. by
using wider feet, adjusting the ladder feet to the
Only lean ladders against secure supporting sur-
Only the prescribed heat transfer medium may
be used.
4
Safety harnesses must be secured above the user
if possible. Only secure safety harnesses to buil-
load-bearing capacity.
When using lean-to ladders, there is a risk of
dangerous falls if the ladder sinks, slips or falls
over.
If no non-personal fall protection or fall arrest
system is used there is a risk of falling from a
great height which can lead to serious or fatal
injury if no safety harness or equipment is used.
Contact with live overhead electrical cables and
wiring can lead to mortal injury.
Work in the vicinity of live, electrical cables and
wiring, where contact is possible, can only be
carried out if:
• they are voltage-free and it is ensured that
they remain so for the duration of the work
to be carried out
• the live elements are secured by being cov-
ered up or cordoned off
• safety distances are observed
Voltage radius
3.5 ft ................................. up to 1000 V
7 ft .............................1000 V to 11000 V
10 ft ......................... 11000 V to 22000 V
14 ft ......................... 22000 V to 38000 V
> 16 ft if the voltage is not known
Wear protective goggles when drilling or handling
collectors
Wear safety shoes when carrying out installation
work
Wear cut-proof safety gloves when carrying out
installation work or handling collectors.
Wear a helmet when carrying out installation
work.
If no non-personal fall protection or fall arrest
system or equipment has been installed for tech-
nical reasons, safety harnesses must be worn.
EN
30-40°
0°
Publicidad
Tabla de contenido
