Risk Of Injury; Installation; Preparation - Louis GRIP 11 Instrucciones De Uso

WARNING!
Danger for children and persons with reduced physical,
sensory or mental abilities (e.g. partially disabled persons,
elderly persons with limited physical and mental abilities) or
lack of experience and knowledge of handling motorcycles
(e.g. older children)!
• The kit may include small parts which could be swallowed,
and plastic packaging film. Keep these parts out of the reach
of children to avoid the danger of swallowing and choking or
suffocation.
CAUTION!

Risk of injury!

• To avoid injuries when removing the old grips and fitting the
new ones, ensure that the motorcycle cannot topple over and
that the workplace is well lit.
• You should only fit the grips yourself if you have the
necessary technical knowledge. Otherwise, the job must be
carried out by a motorcycle workshop.

4 | Installation

4.1 | Preparation

Before you start working on your bike, find a suitable place where you can
work undisturbed and tidily. Set out your tools and the parts you need, place
the motorcycle safely on the stand and fully cover the bike tank with a cloth
to protect the paintwork. Before fitting the grips, check that they are the right
diameter for your handlebar, by using a calliper gauge, for example. The right
grip has a slightly larger inside diameter than the left grip, as it has to fit over the
throttle twistgrip.
14