General Maintenance Instructions; Maintenance Schedule - Viking MR 4082 Manual De Instrucciones

13. Maintenance
Risk of injury:
Prior to all maintenance and
cleaning work and before transport
or immobilisation, it is essential to
remove the ignition key and put it in
a safe place, in order to prevent
inadvertent starting of the engine.
Risk of injury:
Always wear gloves. Never touch
the mowing blade before it has
come to a standstill.
Always allow the engine and
muffler to cool before carrying out
maintenance and cleaning work.
Before all maintenance and repair
work, carefully read and observe
the section "For your safety" and
especially the subsection
"Maintenance and repairs". (
General
Risk of injury:
For safety reasons, maintenance
operations on the brakes are not
permitted.
Only allow adjustment and
maintenance operations to be
performed by a specialist dealer.
VIKING recommends
VIKING specialist dealers.
100

General maintenance instructions:

– The maintenance schedule and
maintenance intervals must be strictly
observed.
– In addition to the maintenance schedule
provided in this instruction manual, the
maintenance schedule and
maintenance operations contained in
the engine instruction manual must also
be observed.
The following maintenance and repair
work can be found in the engine
instruction manual:
– Replacing the air filter.
– Information on engine oil (type, oil
capacity, etc.).
– Checking and replacing the spark plug.
– Changing the fuel filter.
– Cleaning the engine.
4.)
It is essential that the following points
are observed prior to all maintenance,
repair and cleaning work:
– Park the machine on level and solid
ground.
– Stop the engine. (
– Remove the ignition key and keep it in a
safe place.
– Engage the parking brake. (
– Allow the engine to cool down
completely.
– Carefully read and observe the section
"For your safety".

13.1 Maintenance schedule

All the instructions in the maintenance
schedule must be strictly observed.
Non-observance of the maintenance plan
can lead to significant damage to the
machine.
Maintenance operations prior to initial
use:
In order to achieve more efficient and safer
operation and to prevent faults, it is
important to be familiar with the condition
11.3)
of the machine.
For this purpose, the following checks are
required before each start (visual
8.9)
inspection):
– Tyre pressure. (
– Wear and damage to tyres.
– Leaks in fuel carrying lines.
– Engine oil level (see engine instruction
– Fuel-tank level.
Note
Due to heavy-duty use, especially
in professional operation, shorter
maintenance intervals than those
specified here may be required.
Moreover, extreme external
conditions such as sandy or stony
ground, dust etc. may lead to
shorter maintenance intervals than
those specified in the instruction
manual.
An inspection by a specialist dealer
must be performed after every 100
operating hours or once a year.
VIKING recommends
VIKING specialist dealers.
13.25)
manual).
0478 193 9901 A - EN