Listening to the satellite radio
Before operating, connect either one of the following (separately purchased) to the satellite unit connector on the
rear of this unit.
• JVC SIRIUS Satellite Radio System, SC-C1 and KS-SRA100, PnP, SC-VDOC1 and KS-SRA100, for listening to the
SIRIUS Satellite Radio.
• XM Satellite Radio System, JVC Smart Digital Adapter–XMDJVC100, CNP2000UC and CNPJVC1 for listening to
the XM Satellite Radio.
For SIRIUS Radio
Activate your subscription after connection:
~
Select "SAT" as the source.
The SIRIUS Satellite radio starts updating all
the SIRIUS channels. (☞ "GCI update" column
below.)
• Once completed, SIRIUS Satellite radio tunes in
to the preset channel, CH184.
Ÿ
Check your SIRIUS ID.
Press [Mode] to show SIRIUS ID. (☞ page 64)
!
Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can
call SIRIUS toll-free at 1-888-539-SIRIUS
(7474).
"Subscription Updated. Press Any Key to
Continue." appears on the monitor once
subscription has been completed.
GCI (Global Control Information) update:
• If channels are updated after subscription, updating starts automatically, and no sound can be heard.
For SIRIUS : "Channels Updating XX% Completed." appears.
For XM : "UPDATING" appears.
• Updating takes a few minutes to complete.
For XM Radio
Activate your subscription after connection:
• Only Channel 0, 1, and 247 are available before
activation.
~
Select "SAT" as the source.
XM Tuner * starts updating all the XM channels.
"Channel 1" is tuned in automatically. (☞ "GCI
update" column below.)
Ÿ
Check your XM Satellite Radio ID
labelled on the casing of the XM Tuner,
or tune in to "Channel 0"
!
Contact XM Satellite radio on
the internet at <http://xmradio.
com/activation/> to activate your
subscription, or you can call 1-800-XM-
RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
* XM Tuner: XMDirect ™ Tuner Box or XMDirect2 Tuner
System
63
☞
.
(
page 64)