Palazzetti IDRO Instrucciones De Uso página 46

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

INSTALLATION
Do not use the sliding system of the boiler to load
pellets into the container.
Extraction of the stove:
To extract the stove, do the following (Fig. 6.1.5):
1. Open the door;
2. Insert the key (1) in its place;
3. Turn the key counter-clockwise to position (O);
4.
Extract the stove by exerting pressure on the
two side slots (2)
2
This operation affects a safety micro-switch (W)
which either cuts off the electrical power supply.
W
6.1.1 Inserting the stove:
1
To insert the stove, do the following (Fig. 6.1.6):
1. Push the stove into its place;
2. Insert the key (1) in its hole;
2
Fig. 6.1.6
3. Turn the key clockwise to position (I);
4. Remove the key and close the door.
The electrical power supply will be restored by the
safety micro-switch (W).
46/172
cod. 00 477 1490 - 11/2013 - PN - Italy

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido