Palazzetti IDRO Instrucciones De Uso página 56

7.6 ADVANCED USE OF THE CONTROL
PANEL
The functions for the advanced management of the
stove will be illustrated and explained in this chapter
like, for instance, programming automatic turning
on and turning off, use of a different user interface
(Short menu type) and more still.
Figure 7.6 shows the display highlighting the
elements that can be viewed.
Function:
the description of the function that can
be activated is in the center in upper
case.
Command: there could be a symbol (
a word written in italic (ok, x) on the
corners (by one of the four keys);
these commands are executed by
pressing the key immediately next
to it.
Legend of the commands:
ok  FRQ¿UPV WKH DOWHUDWLRQV PDGH
x - to exit the display and return to the previous
one.
- scrolls the various displays or increases the
parameter value.
- scrolls the various displays or reduces the
parameter value.
To ACCESS the MENUS.
1) Press keys
SET WORK appears on the display.
2) Press to scroll the other menus: MENU
TIMER, MENU SET STOVE.
To ENTER the menù wanted: view the menu
wanted on the display and press ON (ok).
To EXIT the menu and return to the previous one:
press OFF (x).
Example.
To access the MENU SET WORK shown in (Fig.
7.6.1-1) press "ON´ WR FRQ¿UP WKH ³
To scroll the ot
corresponding to t
corresponding to the command.
7.6.1 Menu SET WORK
:LWK WKLV PHQX \RX FDQ VHW DQG DGMXVW VWRYH
o p e r a t i o n , v i e w i n g a l l w o r k p a r a m e t e r s
simultaneously.
What to do:
1) Display the "MENU SET WORK" (Fig. 7.6.1-1)
2) press ON (ok) to access it; the initials of the
work parameters appear on the second line of
the display (Fig. 7.6.1-2):
P = POWER; (see paragraph 7.4);
T = SET WATER T. (see paragraph 7.4);
t = SET ROOM T. (see paragraph 7.4).
56/172
USE AND MAINTENANCE
,
simultaneously the MENU
k" command.
er menus pre s the key
e command or the key
P
S
) or
C = Command
F = Function
P = First Line
S = Second Line
C C
F
C
cod. 00 477 1490 - 11/2013 - PN - Italy
C
Fig. 7.6
Fig. 7.6.1-1