Timer buttons and timer display
Observe the following sequence of steps if you wish to prepare or heat food in
your Thermomix TM31:
Step 1: Select a time
Use the timer buttons to preset an operating time of up to 60 minutes 3 .
Press the + to increase time and the – button to reduce it. To change time
gradually, press the button briefly. Press and hold the + button to incre ment
the timer display rapidly, e.g. 4 .
Time selection:
0–1 minute in increments of 1 second
1–10 minutes in increments of 30 seconds
10–60 minutes in increments of 1 minute
When the display is in the zero setting you can preset the time directly to
1 minute by briefly pressing the – button; therefore you do not have to count up
in increments of 1 second. Then proceed as indicated above.
Press both buttons simultaneously to set the displayed time to 00:00 3 .
Step 2: Select a temperature (see page 30 ff.)
Select the appropriate temperature if the food should be heated or cooked.
If not proceed with step 3.
Step 3: Turn the speed selector (see page 32 ff.)
After the speed selector has been turned, the preset time is counted backwards
in steps of one second, until 00:00 is reached.
When the appliance is in cold mixing mode the mixing speed switches off after
the preset time has expired. A buzzer will sound to indicate that the job has
been completed.
When the appliance is in heating or cooking mode the mixing knife will
continue to rotate in the gentle stir setting after the preset time has expired.
To switch off the buzzer turn the speed selector back to
IMporTanT:
heating and cooking are only possible if a time period has been preset.
3
4
/
.
Working with the Thermomix TM31
29