Anthogyr SAFE RELAX Instrucciones De Uso página 19

The settings are identified as follows, from the lowest to the
highest:
nB: The notch for the desired setting (5 shown here) should be aligned with
the "Safe Relax" logo.
After the clinical case has been analysed, it is recommended
that a low frequency and intensity be used to initiate treatment,
and gradually increase both settings if necessary. Before any
operation is carried out, it is strongly recommended to verify that the
medical device is working properly, away from the patient's mouth.
6.4 Connection/disconnection of the instrument :
(Applies for both Automatic and Manual crown-remover)
It is preferable to wear protective gloves for all tool handling. cut risk.
check the condition of the rotary instruments used and
handle them cautiously and carefully.
It is essential that the motor is stopped when inserting or
extracting the instrument and away from the patient's
mouth (except wires).
Inserting and locking the instrument:
• Insert the attachment (Hook or ATD Wire-Tip) into the bayonet by
pushing it fully into the recess.
• give a quarter-turn to the left to lock the spigot into its ratchet
position.
• check that the instrument is properly attached, through a slight
axial movement with each tool change.
19