Error Limits - Mettler Toledo SevenCompact S210 Instrucciones De Manejo

Message
Update failed
Export failed
8.5 Error limits
Message
Out of range, determine again
Buffer/standard temp. out of range
Offset out of range
Slope out of range
Wrong buffer
Invalid pH for user-defined buffer
ATC measured temperature is different
to the user-defined value
38 Maintenance
Description and Resolution
The software update process failed. This could be due to
the following reasons:
● The USB stick is not connected or it is disconnected
during the update process
● The update software is not in the correct folder
The exporting process failed. This could be due to the fol­
lowing reasons:
●
The USB stick is not connected or it is disconnected
during the exporting process
● The USB stick is full
Range not accepted
pH
mV
T (pH)
| Eref1-Eb | > 60 mV
Slope < 85% or > 110%
I ∆Eref1I < 10 mV
I ∆pHI < 1 pH
| T(ATC)T(buffer) | > 1 °C
<-2.000 or > 20.000
<-2000.0 or > 2000.0
< 5 or > 50 °C