Safety Measures - Mettler Toledo SevenCompact S210 Instrucciones De Manejo

2 Safety Measures
Measures for your protection
Risk of explosion
Risk of corrosion
Measures for your operational safety
Caution
4

Safety Measures

● Never work in an environment subject to explosion hazards! The housing of
the instrument is not gas tight (explosion hazard due to spark formation,
corrosion caused by the ingress of gases).
●
When using chemicals and solvents, comply with the instructions of the pro­
ducer and the general lab safety rules!
● Always operate and use the instrument in accordance with the instructions
contained in this manual. The instructions for setting up your new instrument
must be strictly observed.
● Do not open the instrument, it does not contain any parts which can be
maintained, repaired, or replaced by the user.
● Have the meter serviced only by METTLER TOLEDO Service!
● Any spillage should be wiped off immediately! Some solvents might cause
corrosion of the housing.
●
Avoid the following environmental influences:
•
Powerful vibrations
•
Direct sunlight
•
Atmospheric humidity greater than 80%
• Corrosive gas atmosphere
• Temperatures below 5 °C and above 40 °C
• Powerful electric or magnetic fields