SMA FLX Serie Guia De Instalacion página 41

Technical Data
Nomen- Parameter
clature
Storage temperature
Overload operation
Overvoltage
categories
Table 5.2 Specifications
1)
At rated grid voltage (V
2)
To utilise the full range, asymmetrical layouts must be considered
including start-up voltage for at least 1 string. Achieving nominal
power will depend on configuration.
5 5
Parameter
Connector type
Parallel mode
Interface
Options
PV Sweep
Overload operation
Grid supportive functionality
Active power control
Reactive power control
DC short-circuit protection
Table 5.3 Inverter Features and Functionalities
5)
Remote control via external device.
Parameter
Electrical
Safety (protective class)
PELV on the communi-
cation and control card
Overvoltage categories
Functional
Islanding detection - loss
of mains
Voltage magnitude
Frequency
DC content of AC current
Insulation resistance
RCMU - Type B
Table 5.4 Safety Specifications
40
10
), Cos(phi)=1.
ac,r
5)
5)
FLX series
Class I (grounded)
Class II
Grid: OVC III
PV: OVC II
•
Disconnection
•
3-phase monitoring
•
ROCOF
Disconnection, included
Disconnection, included
Disconnection, included
Connection prevented, included
Disconnection, included
L00410568-03_2q / Rev. date: 2014-06-20
FLX series
12.5 15
-25..60 °C
Change of operating point
Grid: OVC III
PV: OVC II
3)
At symmetric input configuration.
4)
SPL (Sound Pressure Level) at 1 m under normal operating
conditions. Measured at 25 °C.
FLX series
Sunclix
Yes
Ethernet (Web interface), RS-485
GSM Option Kit, Sensor Interface Option, PLA Option
Yes
Change of operating point
Fault ride-through
Integrated, or via external device
Yes
Yes
17