Operating Procedure; Settings Table - Greenlee CMI-2000 Manual De Instrucciones

Operation
Electric shock hazard:
Contact with live circuits could result in severe injury or death.

Operating Procedure

1. Refer to the "Settings Table." Set the selector to the proper setting, press SELECT (when instructed to
do so), and connect the test leads to the meter.
2. Refer to "Typical Measurements" for specific measurement instructions.
3. Test the unit on a known functioning circuit or component.
• If the unit does not function as expected on a known functioning circuit, replace the batteries.
• If the unit still does not function as expected, call Greenlee for technical assistance at
800-435-0786.
4. Take the reading from the circuit or component to be tested.

Settings Table

If the correct function is not present for the chosen switch position, press SELECT until the desired icon
appears.
The dual display options are shown along with the icons. In the table, "~V
appear in the primary display, and "Hz" appears in the secondary display. This combination shows the AC
voltage measurement in the primary display and frequency in the secondary display.
To measure
this value ...
AutoCheck™
Voltage (AC) and Frequency
Voltage (AC VFD) and Frequency
Voltage (AC + DC) and Frequency
Voltage (DC)
Current (AC) and Frequency
Current (AC + DC) and Frequency
Current (DC)
Continuity
Resistance
Diode
Frequency
Capacitance**
Temperature
* Use the top side of the stationary jaw, or for more precise measurements use a probe in the +
terminal.
** Discharge capacitor before measurement. Refer to "Typical Measurements" regarding polarized
capacitors.
*** Thermocouple + connects to +, thermocouple – connects to COM.
10
Press SELECT
Set the
until these
selector
icons appear
to this
on the display
symbol ...
LoZ Auto or
AutoCheck
V
,
VFD
V
,
V
A
A
,
A
Ω
V
Hz
°C°F
Hz " indicates that "~" and "V"
Connect
the red
lead to ...
...
V
LoZ,
or
+
V
LoZ, or
MΩ
Hz +
,
+
Hz
, ,
+
Hz
,
+
N/A
Hz
, ,
N/A
Hz
,
N/A
Ω
+
MΩ
+
+
Hz
+
nF
+
C or F
Connect
the black
lead to ...
COM
COM
COM
COM
COM
N/A
N/A
N/A
COM
COM
COM
COM
COM
***