Overcast Stretch Stitching; To Sew; Smocking - Sears Kenmore 385.18330 Manual De Instrucciones

Tabla de contenido

Publicidad

Overcast Stretch Stitching
(_ Stitch selector:
Q Stitch width:
Stitch length:
(_ Needle thread tension:
(_ Presser foot A:
9
3 to 65
Gold stretch stitch position
2 to 6
Zigzag foot
®
w,oT.®
LENGTH
(_)
This stitch is for sewing a seam with an overcast finish. It is
used when making swim wear, ski pants and other garments
which require stretch
• To sew
Place raw edge of fabric to the "left" of the needle as shown
Sew in a manner so that the needle piemes the fabric very
close to the outside edge, Or place the fabric to allow a
5/8"(1.6 cm) seam, then trim seam allowance,
Raw or worn edges of older garments can be overcasted to
prevent further raveling,
J
NOTE:
Use a #11 blue stretch needle, which effectively
prevents skipped stitching.
Smocking
(_ Stitch selector:
4
(_ Stitch width:
3 to 6,,5
Stitch length:
Gold stretch stitch position
(_ Needle thread tension:
2 to 6
_) Presser foot A:
Zigzag foot
(_ Presser foot F:
Satin stitch foot
O Wrong side of fabric
Smocking is a delicate decorative treatment used on children's
clothes or women's blouses,
Choose a soft and lightweight fabric such as batiste, gingham
or challis, Cut the fabric three times wider than the projected
width. Set stitch length at "4" and sew rows of straight stitches
3/8"(1_0 cm) apart across the area to be smocked,
Knot the threads along the edge, Pull the bobbin threads to
distribute the gathers evenly and secure the threads,
Sew the decorative
stitches
of your choice between
the
gathered rows Remove the gathering stitches.
NOTE:
I
Loosen the needle thread tension to make gathering
easier.
68
_
WIDTH
_'_
_LENGTH
(_
OR
o
ou

Publicidad

Tabla de contenido
loading

Tabla de contenido