How To Adjust Buttonhole Stitch Balance - Sears Kenmore 385.18330 Manual De Instrucciones

If thebuttonis extremely t hick,makea testbuttonhole_
If it is difficult t o fit the buttonthrough thetestbuttonhole,
lengthen the bL_onhole b y pulling thebuttonholder o nthe
footbackto increase thetength.
(_)Gap
How to Adjust Buttonhole Stitch Balance
Use the stitch length control _) to adjust stitch density.
Turn the dial in direction (_) for a coarser density (_).
Turn the dial in direction (_ for a tighter depsity (_).
LENGTH
®
If the sides of the buttonhole are not balanced, do the
following:
If the buttonhole looks like _-_, move the lever with the
screw driver to the right ( + ) to make the right side of
the buttonhole less dense (see illustration).
If the buttonhole looks like (_), move the lever with the
screw driver to the left ( - ) to make the right side of
the buttonhole denser..
(g) Buttonhole pitch balance adjusting lever
®
®
78
AUTO BH