Tabla de contenido
Publicidad
Manual
Buttonhole
0 Stitch selector:
0
Q Stitch width:
3 to 6,5
(_ Stitch length:
Blue zone
(_ Needle thread tension:
2 to 6
(_ Presser foot B:
Buttonhole foot
, Manual
Buttonhole
* If the diameter of the button is more than 1,,0"(25 cm), a
buttonhole must be made manually as follows:
[] Turn the handwheel toward you to raise the needle to its
highest position. Raise the presser foot lifter.
[] Set the stitch at "I]" by turning the stitch selector,
* If the stitch is already on at "I]" reset the machine in
accordance with the instructions on page 76.
[]Attach
the buttonhole foot (B).
[]
Pull the buttonhole lever downward as far as it will go.
[] Lower the needle into the garment where the buttonhole
is to start, and lower the foot°
[] Sew the front bartack and left row, then stop the machine
after sewing the desired total length of buttonhole.
[]
Pull the buttonhole lever toward you,
[]
Sew the back bartack and right row, then stop the ma
chine at the starting point
* To cut the opening and to reset for sewing the next
buttonhole, refer to the instructions on page 76.
_
WIDTH
(_
r%@[
®
%_
®
J
82
Publicidad
Tabla de contenido
