Reading Of Consumed Drinks And Reading Of Calculated Litre - Promac GREEN ME Manual Del Usuario

9.2.1 Reading of consumed drinks and reading
of calculated litres
There is the possibility of reading the consumed
drinks (coffee and tea) according to the procedure
described hereafter.
To access READING OF CONSUMED DRINKS and
LITRES, just press button E (exclusively from push
button panel of group 1) and keep it pressed more
than 10 seconds.
To exit from the environment of READING OF CON-
SUMED DRINKS and LITRES, press again the same
button at any time.
In this case, buttons A and B perform the special
function of incrementing/decrementing the displayed
values concerning the reading of consumed drinks.
"Cumulative Total" means the total coffee dispensings
made, i.e.the sum of all dispensings made by pres-
sing buttons A-B-C-D-E of each group.
Tea dispensings ARE NOT INCLUDED in the Cu-
mulative Total.
Dosing also offers the possibility of analyzing the
details of the total dispensings made by every single
"button" of each group.
76
From the "Cumulative total", by pressing button A
the total related to button A of group 1 will be di-
splayed.
Now whenever button A of group 1 is pressed, all
totals concerning the single buttons of every group
will be displayed in sequential modes (1°, 2°, 3°, 4°
and 5° button for 1°, 2° and 3° group).
If button B of group 1 is pressed, this will enable to
go back to the previous total reading.
At the end of the readings concerning the coffee
doses of every single group (button 5, group 3), the
pressure of button A will enable the user to read the
total TEA dispensings made; in this case it will be a
total as no reading division between tea1 and tea2
is provided.
If button A is pressed again, this will enable to read
the litres calculated up to that moment.
COVER