Hartmann Veroval Compact BPW 22 Instrucciones De Uso página 62

English
EN
■ Do not eat, drink or exercise for at least 30 minutes before the
measurement.
■ Please wait for at least one minute between two measurements.
■ Always take measurements at the same time of day. Only regular
measurements taken at the same time each day over an extended
period give a meaningful assessment of blood pressure values.
■ Do not measure when you have a strong urge to urinate. A full
bladder can increase blood pressure by about 10 mmHg.
■ Do not start a measurement until you have put the device on. Press
the START/STOP button
followed by time and date, indicates that the device is carrying out an
automated check and is ready for use.
■ Check the display segments for completeness (see Chapter 1).
■ The cuff automatically inflates after about 0.5 seconds. If this inflation
pressure is insufficient or if the measurement is interrupted, the device
continues to pump in increments of 40 mmHg until a high enough
pressure is reached. During inflation, the result display on the left also
increases at the same time.
Important: Do not speak or move for the duration of the
measurement.
. The appearance of all display segments,
■ As the cuff pressure is released, the heart symbol
drop in cuff pressure is shown on the display.
■ After the measurement is complete, the systolic and
diastolic blood pressure as well as the pulse rate (see
Fig. 1) are shown simultaneously.
■ In addition to the measured values, the time, date,
associated user memory or
memory numbers (e.g.
M
measured value is automatically stored in the displayed
user memory. While the result of the measurement
is displayed, you can assign the values to the
corresponding user memory by pressing the
button. If you do not assign them, the measured values are automatically
stored in the user memory shown on the display. You can use the result
indicator on the left in the display to classify your measurement result
(see table in Chapter 3 - Blood Pressure Information).
■ To switch off the device, press the START/STOP button
the device switches off automatically after 60 seconds.
62
flashes and the
and associated
) are shown. The
or
, otherwise
Fig.
1