English
EN
■ By pressing the
button again (or the
if you are in user memory 2) the average values for
all evening measurements 'PM' (6.00 pm to 8.00
pm) taken over the last 7 days are shown.
Individual measured values
■ By pressing the
button again (or the
if you are in user memory 2), all memory values
can be retrieved one after the other, starting with
the most recently measured value.
button
button,
Deleting stored readings
All data saved for each user can be deleted separately for user memory
user memory (
Press and hold the user memory button for 5 seconds. 'CL 00' appears on
the display. All data in the selected user memory have now been deleted.
If you release the button early, no data will be deleted.
64
■ If an irregular heartbeat was detected during measurement, that
information
is also stored and displayed when the measured
value is retrieved from the device's memory, along with the systolic
and diastolic blood pressure readings, pulse rate, time, date and year.
■ You can cancel memory recall at any time by pressing the START/
STOP button
. The device switches off automatically otherwise
after a few seconds.
■ The stored values will still be available even if the power supply is
interrupted, e.g. when changing the batteries.
and user memory
. To do this, press the key of the corresponding
or
). The average value is then shown on the display.