Transport And Interim Storage; Intended Use (Application) - Wilo Stratos Serie Instrucciones De Instalación Y Funcionamiento

Ocultar thumbs Ver también para Stratos Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English

3 Transport and interim storage

When receiving the material, check that there has been no damage during the
transport. If shipping damage has occurred, take all necessary steps with the
carrier within the allowed time.
CAUTION! Risk of injuries to personnel and damage to property!
Incorrect transport and interim storage can cause damage to the product
and injury to personnel.
• The pump and its packaging must be protected against moisture, frost and
mechanical damage during transport and interim storage.
• Packaging that has become weakened due to moisture may allow the pro-
duct to fall out, causing injury to personnel.
• When the pump needs to be transported, it may be carried only by the
motor/pump housing. Never carry it by the module/terminal box, cable or
external capacitor.

4 Intended use (Application)

CAUTION! Possible damage of the pump!
This pump is intended for use with water and water/glycol only .
The high-efficiency pumps of the Wilo-Stratos/-D/-Z series are used to
circulate fluids (no oil or oleiferous fluids, no foodstuffs) in
• Hot water heating systems,
• Cooling and cold water circuits,
• Closed circulation systems.
WARNING! Health hazard!
The materials of the Wilo-Stratos/-D can cause damage to one's health,
since they are not approved for use in secondary hot water circulation
systems.
Do not use Wilo-Stratos/-D pumps in secondary hot water systems.
Permissible liquids and requirements:
• Heating water according the requirements of accepted standards of water
quality in heating systems.
• Water and water/glycol mixtures in a maximum ratio up to 1:1. High glycol
concentration and low temperature systems may require a reassessment of the
hydraulic data to compensate for the increased viscosity (please contact your
WILO representatives for more information). Use of additives (corrosion
inhibitors, oxygen scavengers etc.) must be in compliance with the
manufacturer instructions.
• If other fluids or additives are used, please contact WILO for proper
authorization.
6
Subject to technical alterations!
WILO SE 03/2016

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Stratos-d serieStratos-z serie

Tabla de contenido