Wilo Stratos Serie Instrucciones De Instalación Y Funcionamiento página 27

LC display
Installation and operating instructions Wilo-Stratos/-D/-Z
Setting
Menu point only appears if a Stratos IF module
was inserted with input 0...10 V.
Switch input 0...10 V on/off
Activate input 0...10 V: "ON" and the "module
motor symbol" appears in the display.
The setpoint cannot be selected manually using
the control button. "10V" is indicated in the basic
setting .
The setting can be altered by turning
the control button.
Deactivate input 0...10 V: "OFF" appears in the
display and the "motor symbol" disappears.
Setting stored.
If the input was switched on, the menu manager
jumps to menu point
If no input voltage is applied at the 0-10 V contact,
"Off" appears on the display and the "motor
symbol" is not displayed.
.
English
23