Safety Features - Num'axes Canifugue Small Manual De Instrucciones

Number of beep sounds heard when
switching levels
1
2
4
5
7
8
To change the stimulation level, proceed in the following way:
− When switching on the collar, keep the magnetic key in contact with the
Diagram 5). After the beep sound indicating that the collar is on, a series of beep sounds is emitted (from 1 to 8) indicating
the selected level. Levels 1 to 8 run through as long as you leave the magnetic key in contact with the
− Move the magnetic key away from the collar as soon as you have reached the desired level. The collar will memorize your
selected level. Next time you will switch on the collar, it will be in the level you selected last.
•

Safety features

The pet fencing system comes complete with 3 safety features:
• wire break alarm
If the antenna wire breaks or if a connection fails, the transmitter will alert you to this operating default by emitting continuous
beep sounds.
• warning zone evacuation feature
After approximately 20 seconds of continuous presence in the warning zone, your dog will be signalled to leave the zone by
the emission of a few short stimulations.
• stimulation zone evacuation feature
If your dog remains in the stimulation zone for approximately 20 seconds, the receiver collar stops emitting stimulations. The
normal functioning resumes when your dog leaves this zone.
Checking/reloading collar battery
•
When the indicator light flashes in red when turning on/off the collar, it indicates that the battery is too low.
Levels Stimulations
1
low level stimulations:
2
for cats or small dogs with shy or sensitive temperament
3 3
4
medium level stimulations:
5
for cats or small dogs with average temperament
6 6
7 strong level stimulations:
8 for cats or small dogs with dynamic or difficult temperament
28
symbol located on the front of the collar (ref.
symbol.