Fire-Extinguishing Materials To Be Used; Glossary - Corghi EYE LIGHT Manual De Uso

This product may contain substances that can
be hazardous to the environment and to human
health if it is not disposed of properly.
The following information is therefore provided
to prevent the release of these substances and
to improve the use of natural resources.
Electrical and electronic equipment must never
be disposed of in the usual municipal waste but
must be separately collected for their proper
treatment.
The crossed-out bin symbol, placed on the
product and on this page, reminds the user that
the product must be disposed of properly at the
end of its life.
In this way it is possible to prevent that a non
specific treatment of the substances contained
in these products, or their improper use, or im-
proper use of their parts may be hazardous to the
environment or to human health. Furthermore,
this helps to recover, recycle and reuse many
of the materials contained in these products.
Electrical and electronic manufacturers and dis-
tributors set up proper collection and treatment
systems for these products for this purpose.
Contact your local distributor to obtain informa-
tion on the collection procedures at the end of
the life of your product.
When purchasing this product, your distributor
will also inform you of the possibility to return
another end-of-life piece of equipment free of
charge as long as it is of equivalent type and had
the same functions as the purchased product.
Any disposal of the product performed in a
different way from that described above will
be liable to the penalties provided for by the
national regulations in force in the country where
the product is disposed of.
Further measures for environmental protection
are recommended: recycling of the internal and
external packaging of the product and proper
disposal of used batteries (only if contained in
the product).
Your help is crucial in reducing the amount of
natural resources used for manufacturing electri-
cal and electronic equipment, minimise the use
of landfills for product disposal and improve
the quality of life, preventing potentially haz-
ardous substances from being released in the
environment.
76
FIRE-EXTINGUISHING
MATERIALS TO BE USED
Consult the following table to choose the most
suitable fire extinguisher.
Dry materials
Water
Foam
Powder
CO2
Flammable liquids
Water
Foam
Powder
CO2
Electrical equipment
Water
Foam
Powder
CO2
YES** Use only
extinguishers are not at hand and when the fire
is small.
WARNING
The indications in this table are of a general
nature. They are designed as a guideline for
the user. The applications of each type of extin-
guisher will be illustrated fully by the respective
manufacturers on request.

GLOSSARY

Here is
a brief description of some technical
terms used in this manual.
UNBALANCE CALIBRATION
This procedure calculates suitable correction
coefficients starting from known operating con-
ditions. It improves the machine accuracy by
correcting to a certain extent the calculation er-
rors that may result from the alteration of the
machine's features over the course of time.
CENTRING
Procedure for positioning the wheel on the
wheel balancer shaft to ensure that the shaft
axis corresponds to the wheel rotation axis.
EYE LIGHT - Operator's manual
YES
YES
YES*
YES*
NO
YES
YES
YES
NO
NO
YES
YES
if more appropriate