CONNECTION MASTER&SLAVE COMMUNICATION
1 2 3 4
1. unscrew the cover
located on its base
2. Enter the communication cable through the PG.
3. Remove the terminal board from its housing.
4. Carry out the connection as indicated in fig.7b.
5. Replace the strip in its housing. Screw the cover and
screw the PG gland.
6. If the equipment has been supplied with the
communication cable, it governs the following color
code: 1-black, 2-brown, 3-blue and 4-yellow/green.
They will be connected according to detail A:
fig.7a
1
1
2
3
3
2
4
4
COMMUNICATION CABLE
-8-
?
and loosen the PG gland
.
A
1 3 2 4
fig.7b