Safety Instructions - Extel WEVPMS 253.2 Instrucciones De Uso

Ocultar thumbs Ver también para WEVPMS 253.2:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 7

1. SAFETY INSTRUCTIONS

Important !
• Please read the user manual thoroughly before installing or using this product.
• If you install this product for other people, please give the manual or a copy to the end user.
Warning :
• The different elements can only be dismantled by an authorised technician.
Safety instructions :
• To safety use this system, it is essential the fitters, users and technicians follow the safety procedures described
in this manual.
• Specific warnings and caution symbols are indicated on the elements if necessary.
2. DESCRIPTION
(fig 1)
• The product that you have just acquired is the additional monitor of the kit videophone WEVP 252.2.
3. COMPONENTS
1. Communication with the road side panel after a call.
2. Monitoring or image resume key.
3. INTERCOM key.
4. Control of a strike or electrical lock (12 V
output at the rear of the camera).
5. Not used.
6. Indicator of silent ring tone and indoor melody.
7. Colour adjustment.
8. Brightness adjustment.
9. Indoor ring tone and melody switching on/off.
10. 7" colour screen (18 cm).
11. Microphone to communicate with the roadside panel DOOR PHONE or with the main monitor INTERCOM.
12. At the rear of the monitor, outlet for the 15 V
plug of the adapter (adapter to connect to an installation
compliant with standards in force: NFC 15-100 for France).
Note : The ordering of a motorization and lighting is only possible since the principal monitor.
4. INSTALLING
1. Fasten the wall mounting (2) so that the monitor screen is at a height of approximately 1.60 metres.
2. Connect the 6 wires coming from the main monitor.
3. Connect the adaptor plug (3) into the back of the monitor (without connecting it to the mains).
4. Position the monitor (1) on the wall mounting (2).
5. Connect the power supply unit plug to the 230 V wall connector.
Note: If the power supply cable has to be cut, ensure that the colour coding of the wires is maintained when reconnecting.
CFI EXTEL WEVPMN 253
- V2 - 01/2012
.2
GB1

Publicidad

Tabla de contenido
loading

Tabla de contenido