Cleaning Mode Selection - ECOVACS Deebot M8 Manual De Instrucciones

3.3 Cleaning Mode Selection

DM85 has several Cleaning Modes for you to choose from to effectively clean different floors.
Cleaning Modes are selected using the robot's Control Panel Buttons or using the Remote Control.
* To switch Cleaning Modes using the robot's Control Panel Buttons, Pause DM85 first, and then
press the desired Cleaning Mode Button on the Control Panel.
* To switch Cleaning Modes using the Remote Control, press the desired Cleaning Mode Button twice.
1 AUTO Cleaning Mode (120 Minutes)
This is the most commonly used mode. In
AUTO Cleaning Mode, DM85 cleans in a
straight line and changes direction when it
meets an obstacle.
2 Intensive Cleaning Mode
This mode is good for aggressive cleaning
or for extremely dirty or dusty floors. In this
mode, DM85 follows the same cleaning
pattern as Automatic Cleaning Mode, but is
more sensitive to dirt and dust and performs
a more thorough cleaning.
3. Operating and Programming
11
EN