3. Operating and Programming
3
Spot Cleaning Mode (1 Minute)
This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning
Mode, DM85 focuses on a specific area to
clean.
4
Edge Cleaning Mode
This mode is good for cleaning the edges and
corners of a room. In Edge Cleaning Mode,
DM85 cleans along a border (e.g. wall).
5
Return to Charger Mode
When battery power gets low, DM85 automatically
switches to Return to Charger Mode and returns to
the Charging Dock to recharge itself.
* DM85 can be sent back to the Charging Dock
at any time by Pausing DM85, then pressing the
Return to Charger Mode Button on the robot's
Control Panel, or pressing the Return to Charger
Mode Button on the Remote Control twice.
12
EN