Specification - ROBBE POWER PEAK ULTIMATE 2 Manual De Uso

STOP / ENTER BUTTON
• Pressing the 'STOP' button terminates any process currently running, e.g. CHARGE.
• Pressing the 'ENTER' button confirms a selection, e.g. activation of a selected menu.
• The 'ENTER' button is also used to select a language. Holding ENTER pressed in
while connecting the charger to the power source takes you to the Language Select
menu.
All buttons feature an auto-repeat function, i.e. holding the button pressed in ha the
same effect as pressing the button repeatedly.
INTEGRATED SOUNDER
• The piezo sounder emits a beep to confirm each button-press. It also provides an
audible alert that the charge or discharge process has been concluded, and a warning
that an error has occurred.
TEMPERATURE-CONTROLLED COOLING FAN
• The integral fan automatically starts and stops in response to the temperature of the
charger's output stage.
4.

SPECIFICATION

Operating voltage:
Cell count:
Charge current:
Discharge current:
Charge power:
Discharge power:
Trickle charge:
Final discharge voltage:
Charge termination:
NC / NiMH:
Lead-acid and Lithium:
Dimensions:
Operating instructions
POWER PEAK ULTIMATE 2
11 V ... 15 V DC
12 V lead-acid battery, or a high-performance mains PSU
(do not use a car battery charger!)
1 ... 25 NC / NiMH cells,
1 ... 5 Lithium cells,
1 ... 6 lead-acid cells
0.1 ... 5 A
0.1 ... 5 A, NC and NiMH
120 W, current is regulated accordingly
e.g. 24 V battery voltage, charge current 5.0 A
e.g. 28 V battery voltage, charge current 4.3 A
20 W, current is regulated accordingly
Charged-in capacity < 1 Ah: no trickle charge
Charged-in capacity > 1 Ah: trickle charge at C/20 (NC and
NiMH batteries only)
0.8 V per cell, NC and NiMH,
3 V per cell, LiPo,
1.8 V per cell, lead-acid
Automatic, digital Delta Peak method
Automatic, voltage-dependent
155 x 125 x 55 mm
7
No.
8470