Programming Procedure - ROBBE POWER PEAK ULTIMATE 2 Manual De Uso

'+'
button
'+'
button
'+'
button
'ENTER'
button
8.2 PROGRAMMING PROCEDURE (EXAMPLE: SETTING THE DATE)
You can now enter all the parameters using exactly the same procedure and sequence as
described for setting the parameters in manual mode (see Chapter 7.3). To help you keep
track of the data, a date can be entered instead of the audible beeper. The date is ente-
red in the format 'YYYY-MM-DD'.
Operating instructions
POWER PEAK ULTIMATE 2
'ENTER'
button
'ENTER'
button
'ENTER'
button
The programming procedure is started in this
screen display after you have pressed the 'ENTER'
button to activate the programming loop.
Press the 'ENTER' button to start entering the date.
In addition to the '+' and '-' symbols at the right-
hand end of the top line you will see the year num-
ber flashing; you can now correct it using the '+' or
'-' button. Pressing the 'ENTER' button again cau-
ses the month number to flash, and this can now be
changed using the '+' / '-' buttons. The current
day's date can then be set in the same way. When
the date is correct, press the 'ENTER' button again
to store the information.
'+'
button
'+'
button
'+'
button
17
No.
8470
'ENTER'
button
'ENTER'
button
'ENTER'
button