Using The Charger For The First Time; Working Display - ROBBE POWER PEAK ULTIMATE 2 Manual De Uso

5.

USING THE CHARGER FOR THE FIRST TIME

Connect the crocodile clips to a 12 V lead-acid battery or a suitable mains PSU. Take
great care over correct polarity (red = positive / black = negative).
You can now select the language to be used for the menus when the charger is in use.
Press the '+' or '-' button repeatedly to call up the available languages, which are as fol-
lows:
• German (DEUTSCH)
• French (FRANCAIS)
• Italian (ITALIANO)
• Spanish (ESPANIOL)
• English (ENGLISH)
Press the 'ENTER' button to conclude the process; the Start display shown above now
appears.
5.1

WORKING DISPLAY

During a charge or discharge process this display keeps the user informed of all the
essential data. The top line shows the status indicator, i.e. the type of process ('C' for
charge, or 'D' for discharge); the charged-in or discharged capacity is also shown, toget-
her with the time elapsed since the start. The bottom line displays the battery type ('NC'
for Nickel-Cadmium batteries, 'NM' for Nickel-Metal-Hydride batteries, 'LP' for Lithium-
Status display
Capacity indicator
Battery voltage
B a t t e r y
type
Operating instructions
POWER PEAK ULTIMATE 2
The screen initially displays the device name and
the software version number for a few moments,
then the Start display appears.
If you hold the ENTER button pressed in while con-
necting the charger to the power source, the
Language Select menu appears.
E l a p s e d
time
Charge /
discharge
current
Polymer batteries and 'Pb' for lead-acid
batteries).
This means that all the important parame-
ters are displayed at a glance during a
charge or discharge process.
8
No.
8470