miniland baby digimonitor 7" Manual De Instrucciones página 17

OPERATING INSTRUCTIONS
· To turn ON the camera unit, press the ON/OFF switch (1) located at the front of the camera
for about 2 seconds.
Camera MODE Switch (12)
· CAMERA – in this mode the camera transmits an image and sound continuously, a useful
function for uninterrupted surveillance.
· AUTO – in this mode the camera is on standby and is only activated when a noise is
detected – subject to the sensibility of the programmed volume.
· This mode is particularly useful at night as even though it is connected to the intercom no
sound is transmitted, helping you to sleep more easily. Whenever a noise is detected the
camera will resume the transmission of image and sound.
· When you select this AUTO mode on the Camera and if there is no noise around the
camera, it will go onto standby using the minimum power and may appear to be turned
off but is in fact still turned on. The Intercom screen will turn off when the camera is not
transmitting.
Note to disable this auto function, select CAMERA mode on the camera.
Infrared Night Vision (Automatic)
· The infrared night vision of the camera is designed to allow the camera to pick up pictures
in the dark or places with very poor light.
· In this mode only a black and white image can be seen on the monitor and only objects
placed within 6ft/2m will be observed.
· The camera constantly monitors the light level by light sensor (10) and switches to the
infra-red mode automatically whenever there is insufficient light for normal vision so that you
don't need to risk disturbing your sleeping child.
Channel Selection (Menu button 18)
· 4 channels are provided to enables you to have more than one Camera in use with the
same Intercom. You can switch channels on the Monitor by pressing the MENU button (18)
for 6 times. You will see CHI CH2 CH3 CH4 SCAN on screen. Press Adjustment Control
button (+ -) (17) to select a channel number for the additional Camera. The Monitor and
Camera are set on Channel 1 by manufacturer at factory.
Channel Matching (Synchronization) (Code button 25)
This product is designed to Intercom different areas with up to 4 cameras (Channel 1, 2, 3 or
4 assigned to different cameras). The original Monitor and Camera are set on Channel 1 by
manufacturer at factory. If you need to add extra Camera for monitoring, you need to choose
a new channel to 'match' the new camera with existing Monitor.